Alcatel-Lucent 7750 SR OS - Page 233

Command Reference
7750 SR OS Interface Configuration Guide Page 233
— adaptation-rule [pir {max | min | closest}]
[cir {max | min | closest}]
—no adaptation-rule
— cbs size-in-kbytes
—no cbs
— high-prio-only percent
—no high-prio-only
— mbs size-in-kbytes
—no mbs
— rate pir-rate [cir cir-rate]
—no rate
— scheduler-policy scheduler-policy-name
—no scheduler-policy
— secondary-shaper secondary-shaper-name rate {max | rate}
— secondary-shaper secondary-shaper-name
— autonegotiate [limited]
— [no] autonegotiate
— dot1q-etype
—no dot1q-etype
— dot1x
— max-auth-req max-auth-request
— port-control {auto |
force-auth | force-unauth}
— quiet-period seconds
— radius-plcy name
— re-auth-period seconds
— [no] re-authentication
— server-timeout seconds
—no server-timeout
— supplicant-timeout seconds
—no supplicant-timeout
— transmit-period seconds
—no transmit-period
— down-when-looped
— keep-alive timer
—no keep-alive
— retry-timeout timer
—no retry-timeout
— [no] shutdown
— [no] use-broadcast-address
— duplex {full | half}
— efm-oam
— [no] accept-remote-loopback
— hold-time time-value
—no hold-time
— mode {active | passive}
— [no]
shutdown
—[no] transmit-interval interval [multiplier multiplier]
— [no] tunneling
— egress-rate sub-rate
—no egress-rate
— [no] egress-scheduler-override
— level priority-level rate pir-rate [cir cir-rate]
—no level priority-level
— max-rate rate
—no max-rate