Interface Configuration
7750 SR OS Interface Configuration Guide Page 371
The no form of this command deletes the link from test-pattern procedure. The test-pattern procedure
must be shutdown first.
Default no test-link
Parameters port-id — The port ID to be used to verify link connectivity within an IMA group.
Values port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
test-pattern
Syntax test-pattern pattern
no test-pattern
Context config>port>ml-bundle>ima>test-pattern-procedure
Description This command specifies the transmit test pattern in an IMA group loopback operation. This value can
only be changed when the test-pattern-procedure command is shut down
The no form of this command restores the test-pattern to the default.
Default 0
Parameters pattern — Specifies an integer taking the following values:
Values 0 — 255
shutdown
Syntax [no] shutdown
Context config>port>ml-bundle>ima>test-pattern-procedure
Description This command enables a configured IMA test pattern procedure.
The no form of this command disables the IMA test pattern procedure.
version
Syntax version IMA-version
no version
Context config>port>ml-bundle>ima>
Description This command configures the IMA version for the multilink bundle group. If there is a version
mismatch between this IMA group and the far end IMA group, the IMA group will become
To Next Page
Loading...
