Interface Configuration
7750 SR OS Interface Configuration Guide Page 427
path
Syntax path {a | b} <portid> raps-tag <VID>
[no] path {a | b}
Context config>eth-ring
Description This command assigns the ring (major or sub-ring) path to a port and defines the Ring APS tag.
Rings typically have two paths a and b.
The no form of this command removes the path a or b.
Default no path
Parameters raps-tag <VID> — Specifies the VID.
Values Dot1q: 1-4094
Values QinQ: 1-4094.1-4094
description
Syntax description long-description-string
no description
Context config>eth-ring>path
Description This command adds a text description for the ring path. The no form of this command removes the
text description.
Default “”
Parameters string — Specifies the text description up to 160 characters in length.
rpl-end
Syntax rpl-end
no rpl-end
Context config>eth-ring
Description This command configures the G.8032 path as a ring protection link end. The ring must have been
declared as either a RPL owner or RPL neighbor for this command to be allowed. Only path a or path
b can be declared an RPL-end.
The no form of this command sets the rpl-end to default no rpl-end.
Default no rpl-end
To Next Page
Loading...
