Alcatel-Lucent 7750 SR OS - Page 457

Interface Configuration
7750 SR OS Interface Configuration Guide Page 457
range
Syntax [no] range vlan-range
Context config>redundancy>mc>peer>mcr>ring>path-b
config>redundancy>mc>peer>mcr>ring>path-excl
Description This command configures a MCR b-path VLAN range.
Parameters vlan-range — Specifies the VLAN range.
Values [0 — 4094] — [0 — 4094]
path-excl
Syntax [no] path-excl
Context config>redundancy>mc>peer>mcr>ring
Description This command specifies the set of upper-VLAN IDs associated with the SAPs that are to be excluded
from control by the multi-chassis ring.
Default If not specified, the default is an empty set.
ring-node
Syntax ring-node ring-node-name [create]
no ring-node ring-node-name
Context config>redundancy>mc>peer>mcr>ring
Description This command specifies the unique name of a multi-chassis ring access node.
Parameters ring-node-name — Specifies the unique name of a multi-chassis ring access node.
create — Keyword used to create the ring node instance. The create keyword requirement can be
enabled/disabled in the environment>create context.
connectivity-verify
Syntax connectivity-verify
Context config>redundancy>mc>peer>mcr>ring>ring-node
Description This command enables the context to configure node connectivity check parameters.