Alcatel-Lucent 7750 SR OS - Page 512

Show Commands
Page 512 7750 SR OS Interface Configuration Guide
Transceiver Type Type of the transceiver.
Model Number The model number of the transceiver.
Transceiver Code The code for the transmission media.
Laser Wavelength The light wavelength transmitted by the transceiver's laser.
Connector Code The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
Diag Capable Indicates if the transceiver is capable of doing diagnostics.
Vendor OUI The vendor-specific identifier field (OUI) contains the IEEE company
identifier for the vendor.
Manufacture date The manufacturing date of the hardware component in the mmddyyyy
ASCII format.
Media The media supported for the SFP.
Serial Number The vendor serial number of the hardware component.
Part Number The vendor part number contains ASCII characters, defining the ven-
dor part number or product name.
Input/Output When the collection of accounting and statistical data is enabled, then
octet, packet, and error statistics are displayed.
Description A text description of the port.
Interface
The port ID displayed in the slot/mda/port format.
Speed
The speed of the interface
Link-level
Ethernet — The port is configured as Ethernet.
SONET — The port is configured as SONET-SDH
MTU
The size of the largest packet which can be sent/received on the Ether-
net physical interface, specified in octets.
Admin State
Up — The port is administratively up.
Down — The port is administratively down.
Oper State
Up — The port is operationally up.
Down — The port is operationally down.
Duplex
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
Label Description (Continued)