Alcatel-Lucent 7750 SR OS - Page 513

Interface Configuration
7750 SR OS Interface Configuration Guide Page 513
Hold time up
The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper
layer protocols.
Hold time down
The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
IfIndex
Displays the interface's index number which reflects its initialization
sequence.
Phy Link
Yes — A physical link is present.
No — A physical link is not present.
Configured Mode
network — The port is configured for transport network use.
access — The port is configured for service access.
Network Qos Pol
The network QoS policy ID applied to the port.
Encap Type
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
Active Alarms
The number of alarms outstanding on this port.
Auto-negotiate
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
Alarm State
The current alarm state of the port.
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the IOM cards, however, the CPU will not obtain the results and
write them to the billing file.
Down-When-Looped
Shows whether the feature is enabled or disabled.
Egress Buf (Acc)
The access-buffer policy for the egress buffer.
Egress Buf (Net)
The network-buffer policy for the egress buffer.
Ingress Buf
(Acc)
The access-buffer policy for the ingress buffer.
Label Description (Continued)