Alcatel-Lucent 7750 SR OS - Page 540

Show Commands
Page 540 7750 SR OS Interface Configuration Guide
Sample Output
A:ALA-2934 show mda 7/2 detail (ATM MDA)
TC Alarm State
Displays notifications that are generated when the ATM interface indi-
cates that the TC sublayer is currently in the Loss of Cell Delineation
(LCD) defect maintenance state or when the TC sublayer is currently
not in the Loss of Cell Delineation (LCD) defect maintenance state.
Last Unknown
VPI/VCI
Indicates the last unknown VPI/VCI that was received on this interface.
Ingress CBR
Indicates the total CBR bandwidth consumed on this interface in the
ingress direction.
Egress CBR
Indicates the total CBR bandwidth consumed on this interface in the
egress direction.
Ingress RT-VBR
Indicates the total real-time variable bit rate (rt-VBR) bandwidth con-
sumed on this interface in the ingress direction.
Egress RT-VBR
Indicates the total real-time variable bit rate (rt-VBR) bandwidth con-
sumed on this interface in the egress direction.
Ingress NRT-VBR
Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth
consumed on this interface in the ingress direction.
Egress NRT-VBR
Indicates the total non-real-time variable bit rate (nrt-VBR) bandwidth
consumed on this interface in the egress direction.
Ingress UBR
Indicates the total unspecified bit rate (UBR) bandwidth consumed on
this interface in the ingress direction.
Egress UBR
Indicates the total unspecified bit rate (UBR) bandwidth consumed on
this interface in the egress direction.
Ingress Total
Indicates the number of valid ATM cells received by the ATM interface
including both CLP=0 and CLP=1 cells. If traffic policing is imple-
mented, then cells are counted prior to the application of traffic polic-
ing.
ATM Link Band-
width
Indicates the total ATM link bandwidth accepted on this interface.
Shaped Bandwidth
Indicates the total shaped bandwidth consumed on this interface in the
egress direction.
HEC Errors
(Dropped)
Indicates the number of cells with uncorrectable HEC errors on this
interface.
HEC Errors
(Fixed)
Indicates the number of fixed HEC errors on this interface.
Label Description (Continued)