Alcatel-Lucent 7750 SR OS - Page 581

Interface Configuration
7750 SR OS Interface Configuration Guide Page 581
Packets 0 0
Errors 0 0
Class 3
Octets 0 270400
Packets 0 2704
Errors 0 0
===============================================================================
*A:mlppp_top#
atm
Syntax atm [detail]
Context show>multilink-bundle>ima
Description This command displays multilink bundle IMA ATM information.
Parameters detail — Displays detailed information.
Output Show Mutlilink-bundle IMA ATM Output — The following table describes show multilink-
bundle IMA ATM output fields..
Mutlilink-Bundle IMA ATM Output Fields Sample Output
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm
=============================================================================
ATM Info for bundle-ima-1/1.1
=============================================================================
Cell Mode : UNI Mapping : Direct
Configured VCs : 1 Configured VPs : 0
Configured VTs : 0 Configured IFCs : 0
Configured minimum VPI: 0
Last Unknown VPI/VCI : none
===============================================================================
ATM Bandwidth Info
Label Description
Cell Mode
Displays the cell format (UNI or NNI) used on the ATM interface.
Configured VCs
Displays the number of configured VCs.
Configured VTs
Displays the number of configured VTs.
Configured mini-
mum VPI
Displays the minimum VPI configured for this bundle.
Last Unknown
VPI/VCI
Indicates the last unknown VPI/VCI that was received on this inter-
face.
Mapping
Displays ATM cell mapping used on this interface: Direct or PLCP.
Configured VPs
Displays the number of configured VPs.
Configured IFCs
Displays the number of configured IFCs.