Show Commands
Page 582 7750 SR OS Interface Configuration Guide 
===============================================================================
                     kbps      %                             kbps      %       
-------------------------------------------------------------------------------
Ingress CBR        : 15232     100%     Egress CBR         : 15232     100%    
Ingress RT-VBR     : 0          0%      Egress RT-VBR      : 0          0%     
Ingress NRT-VBR    : 0          0%      Egress NRT-VBR     : 0          0%     
Ingress UBR        : 0          0%      Egress UBR         : 0          0%     
-------------------------------------------------------------------------------
Ingress Total      : 15232     100%     Egress Total       : 15232     100%    
ATM Link Bandwidth : 15232 kbps    
Shaped Bandwidth   : 15232 kbps    
===============================================================================
connections
Syntax connections
Context show>multilink-bundle>ima>atm
Description This command displays connection information.
Parameters pvc  — Displays ATM port PVC information.
pvp  — Displays ATM port PVP information.
pvt  — Displays ATM port PVT information.
vpi-range — Displays the VPI range.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
vpi — Displays the VPI values.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
vci:  — Displays the VCI values.
Values 1, 2, 5 — 65534
detail  — Provides detailed information.
MDA Values 1, 2
Output Show Mutlilink-bundle IMA ATM Connections Output — The following table describes 
show multilink-bundle IMA ATM connections output fields.
Label Description 
Owner
Identifies the system entity that owns a specific ATM connection.
Type
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.