Alcatel-Lucent 7750 SR OS - Page 583

Interface Configuration
7750 SR OS Interface Configuration Guide Page 583
Mutlilink-Bundle IMA ATM Connections Output Fields
Sample Output
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm connections
================================================================
ATM Connections, Port bundle-ima-1/1.1
================================================================
Owner Type Ing.TD Egr.TD Adm OAM Opr
----------------------------------------------------------------
1/100 SAP PVC 2 2 up up up
================================================================
A:NS052651098#
port-connection
Syntax port-connection [detail]
Context show>multilink-bundle>ima>atm
Description This command displays port connection information.
Parameters detail — Displays detailed information.
Output Show Mutlilink-Bundle IMA ATM Port-Connection Output — The following table describes
show multilink-bundle IMA ATM port-connection output fields.
Mutlilink-Bundle IMA ATM Port-Connection Output Fie lds
Ing.TD
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Egr.TD
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Adm
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
Opr
Up — The bundle is operationally up.
Down — The bundle is operationally down.
OAM
Indicates the OAM operational status of ATM connections.
Label Description (Continued)
Label Description
Port ID Displays the port ID for this bundle.
Admin State ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.