Show Commands
Page 584 7750 SR OS Interface Configuration Guide
Sample Output
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm port-connection
==============================================================================
ATM Port Connection
==============================================================================
Port Id : bundle-ima-1/1.1
Admin State : up Oper state : up
Owner : SAP
Endpoint Type : Port Cast Type : P2P
Ing. Td Idx : 2 Egr. Td Idx : 2
Last Changed : 01/16/2007 14:24:00
==============================================================================
A:NS052651098#
pvc
Syntax pvc [vpi[/vci] [detail]
Context show>multilink-bundle>ima>atm
Description This command displays ATM port PVC information.
Parameters vpi — Displays the VPI values.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
vci: — Displays the VCI values.
Values 1, 2, 5 — 65534
Oper State Up — The bundle is operationally up.
Down — The bundle is operationally down.
Owner Identifies the system entity that owns a specific ATM connection.
Endpoint Type Displays the endpoint type.
Cast Type Indicates the connection topology type.
Ing. Td Idx Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Egr. Td Idx Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Last Changed Indicates the date and time when the interface connection entered its
current operational state.
Label Description (Continued)
To Next Page
Loading...
