Interface Configuration
7750 SR OS Interface Configuration Guide Page 587
Output Show Mutlilink-bundle IMA ATM PVP Output — The following table describes show 
multilink-bundle IMA ATM port-connection output fields. 
Sample Output
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvp 
================================================================
ATM PVPs, Port bundle-ima-1/1.1
================================================================
VPI        Owner  Type     Ing.TD  Egr.TD  Adm  OAM         Opr                
----------------------------------------------------------------
2          SAP    PVP      1       1       up   up          up  
================================================================
A:ima2#
Label Description 
VPI
Displays the VPI value.
Owner
Identifies the system entity that owns a specific ATM connection.
Type
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Ing.TD
Specifies the ATM traffic descriptor profile that applies to the receive 
direction of the interface connection.
Eng.TD
Specifies the ATM traffic descriptor profile that applies to the transmit 
direction of the interface connection.
Adm
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
OAM
Indicates the OAM operational status of ATM connections. 
Opr
Up —  The bundle is operationally up.
Down — The bundle is operationally down.