Alcatel-Lucent 7750 SR OS - Page 588

Show Commands
Page 588 7750 SR OS Interface Configuration Guide
pvt
Syntax pvt [vpi.vpi] [detail]
Context show>multilink-bundle>ima>atm
Description This command displays ATM port PVT information.
Parameters vpi — Displays the VPI values.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
detail — Provides detailed information.
MDA Values 1, 2
Output Show Mutlilink-bundle IMA ATM PVT Output — The following table describes show
multilink-bundle IMA ATM port-connection output fields.
Sample Output
A:ima2# show multilink-bundle bundle-ima-1/1.1 ima atm pvt
================================================================
ATM PVTs, Port bundle-ima-1/1.1
================================================================
VPI Range Owner Type Ing.TD Egr.TD Adm Opr
----------------------------------------------------------------
4.5 SAP PVT 1 1 up up
================================================================
A:ima2#
Label Description
VPI Range
Displays the VPI range:
Owner
Identifies the system entity that owns a specific ATM connection.
Type
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Ing.Td
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Egr.Td
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Adm
ima — Indicates that the bundle is of type IMA group.
Down — The bundle is administratively down.
Opr
Up — The bundle is operationally up.
Down — The bundle is operationally down.