Alcatel-Lucent MDR-8000 - Front Panel Craft Interface Connector J5

3-68
3.19.5
Front Panel Craft Interface Connector J5
The CRAFT J5 connector on the front panel is used to interface the TMN interface module
with a PC. The CRAFT interface is an RS-232-compatible DCE interface, DB9 male to DB9
female cable, PN 695-7848. Refer to Table 3-25 for connector pinout/function. Refer to
Table 3-26 for mating cable pinout/function. See Figure 3-42 for location/pinout details.
Figure 3-42 CRAFT Terminal Connector J5 Location and Pinout
Table 3-25 CRAFT Terminal Connector J5 Pinout
PIN FUNCTION
1 DCD
2 TXD
3 RXDD
4 DTR
5 GND
6 DSR
7NC
8NC
9NC
LMW-8054F-SM
01/21/03
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
J5
FRONT VIEW
51
96
DTR
GND
TxD
RxD
DCD
RTS
DSR
CTS
RI