3-9
3 The MDR-8000 Synchronous repeater Cable for the OC3 version of the radio
uses the same part number as the ELMC cable.
3.6 DS1 CONNECTIONS (J303 IN AND J304 OUT)
Recommended connectorized cable assembly – PN 695-7806-001 through -005 (22 AWG 16
pair shielded, jacketed cable with 37-pin D-type connector on one end). See
Figure 3 - 4 for
shelf connector location and pinout. Refer to Table 3 - 3 for mating cable wiring and color code.
Figure 3 - 4 DS1 Connectors Location and Pinout
Table 3 - 2 Synchronous Repeater Cables
Capacity Part Number Designation No. of Pins
DS1 695-7836-001/005 J314 50
DS3 695-7836-001/005 J401 50
OC3 695-4125-007/013 J203 9
J303/J304
T1 1-16
J323 J324 T1 17-32T1 17-32
FRONT VIEW
37
19
20
1
LMW-9037F
07/03/07
To Next Page
Loading...
