Alcatel-Lucent MDR-8000 - Oc3;Stm-1 Aux Interface Board Wayside Ds1 Connections (J201 in and J202 Out); Wayside DS1 Terminal; Wayside DS1 Repeater

3-22
3.13 OC3/STM-1 AUX INTERFACE BOARD WAYSIDE DS1 CONNECTIONS (J201 IN AND J202 OUT)
Wayside DS1 is an option in the MDR-8000 OC3/STM-1 radios that prevents having to add
a SONET add/drop MUX to access payload traffic. This option provides 1 DS1 for each
STS-1 within the OC3/STM-1. Refer to
Table 3 - 7 for ELMC option key requirements for
remote monitoring/controlling wayside DS1.
3.13.1 Wayside DS1 Terminal
Recommended connectorized cable assembly – PN 695-4125-041 (26 AWG 5 pair shielded,
jacketed cable with 9-pin D-type connector on one end). See
Figure 3 - 13 for location. Refer
to Figure 3 - 6 for pinout and color code.
3.13.2 Wayside DS1 Repeater
Recommended connectorized cable assembly – PN 695-4125-051 (26 AWG 5 pair shielded,
jacketed cable with 9-pin D-type connector on each end). See
Figure 3 - 13 for Wayside DS1
repeater interconnect. See Figure 3 - 8 for wayside DS1 repeater interconnect.
Figure 3 - 13 Wayside DS1 Connectors – OC3/STM-1 AUX Interface
J315
J301
J313
J308 J309 J310 J312
J318
J305
J316 J317 J302
J307
J201
INPUT
FRONT VIEW
51
96
GND
LINE 3 IN TIP
LINE 2 IN TIP
LINE 1 IN TIP
LINE 1 IN RING
LINE 2 IN RING
LINE 3 IN RING
51
96
LINE 3 OUT TIP
J202
OUTPUT
FRONT VIEW
GND
LINE 1 OUT TIP
LINE 2 OUT TIP
LINE 1 OUT RING
LINE 2 OUT RING
LINE 3 OUT RING
LMW-7068F
07/23/02
J301