3-13
3.9 DS3 LBO DS3 BNC CONNECTIONS (J21 THROUGH J26)
BNC removal tool (PN 359-0092-010) is required for installing and removing BNC cables.
Recommended connectorized cable assembly for all applications except repeaters, PN 632-
4429-096/180 (8/15 ft RG-59B/U coax cable with straight male BNC connector on one end
and right angle male BNC connector on other end). For repeater applications, recommend
PN 632-4288-096/180 (8/15 ft RG-59B/U coax cable with straight male BNC connector on
each end). See
Figure 3 - 5 for locations. Refer to Table 3 - 5 for connections.
Figure 3 - 7 DS3 LBO DS3 Connectors Location
Table 3 - 5 DS3 LBO Connectors
DS3 INPUTS DS3 OUTPUTS
FUNCTION BNC CONNECTOR FUNCTION BNC CONNECTOR
DS3 LINE 1 J22 DS3 LINE 1 J21
DS3 LINE 2 J24 DS3 LINE 2 J23
DS3 LINE 3 J26 DS3 LINE 3 J25
J315
J301
J313
J308 J309 J310 J312
J318
J305
J316 J317 J302
J307
LMW-7065F
07/23/02
LINE 1 OUT – J21
LINE 2 OUT – J23
LINE 3 OUT – J25
J22 – LINE 1 IN
J24 – LINE 2 IN
J26 – LINE 3 IN
FRONT VIEW
To Next Page
Loading...
