2-10
Figure 2-5 AE-37AA TMN Interface Module Controls, Indicators, and Connectors (Sheet 1 of 2)
Dual-color LED (green/yellow) lights green
to indicate link is active. Blinks green when
receiving data packets on port. Lights yellow
when receiving idle signal (link is not
established). Blinks yellow when link is not
established, but packets are being received.
Dual-color LED (green/yellow) lights green
to indicate link is active. Blinks green when
receiving data packets on port. Lights yellow
to indicate port is misconfigured. Blinks
yellow to indicate collisions.
9-Pin D-type connector for interface
with computer.
Red LED indicates module fault or
reboot in progress.
To Next Page
Loading...
