Managing the Directory Structure (Non-Redundant) Managing CMM Directory Content
page 5-24 OmniSwitch 6250/6450 Switch Management Guide May 2012
Show Switch Files
The files currently installed on a switch can be viewed using the show microcode command. This
command displays the files currently in the specified directory.
To display files on a switch, enter the show microcode command with a directory, as shown:
-> show microcode certified
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
KFbase.img 6.6.3.311.R01 7372509 Alcatel-Lucent Base Software
KFeni.img 6.6.3.311.R01 2486643 Alcatel-Lucent NI Software
KFos.img 6.6.3.311.R01 941331 Alcatel-Lucent OS
KFsecu.img 6.6.3.311.R01 371661 Alcatel-Lucent Security Management
If no directory is specified, the files that have been loaded into the running configuration are shown.
To Next Page
Loading...
