Setting Up End-User Profiles Managing Switch User Accounts
page 9-32 OmniSwitch 6250/6450 Switch Management Guide May 2012
Setting Up End-User Profiles
End-user profiles are designed for user accounts in the carrier market. With end-user profiles, a network
administrator can configure customer login accounts that restrict users to particular command areas over
particular ports and/or VLANs.
End-user profiles are only managed and stored on the switch; profiles are not stored on external servers.
Note. End-user profiles cannot be used in conjunction with user partitioned management; the features are
mutually exclusive.
The following table shows the end-user command areas and the commands associated with each area:
Area Keyword Available Commands
physical flow
flow wait
interfaces
interfaces admin
interfaces alias
interfaces no L2 statistics
trap port link
show interfaces
vlan-table vlan
vlan 802.1q
vlan 802.1q frame type
vlan 802.1q force tag internal
vlan authentication
vlan binding mac-ip-port
vlan binding mac-port-protocol
vlan binding mac-port
vlan binding mac-ip
vlan binding ip-port
vlan dhcp mac
vlan dhcp mac range
vlan dhcp port
vlan dhcp generic
vlan mac
vlan mac range
vlan ip
vlan port default
vlan protocol
vlan port
vlan port mobile
vlan port default vlan restore
vlan port authenticate
vlan stp
vlan user
show 802.1q
show vlan rules
show vlan port mobile
show vlan
show vlan port
show vlan router mac status
mac-filtering-table mac-address-table
mac-address-table aging-time
show mac-address-table
show mac-address-table count
show mac-address aging-time
spantree show spantree
show spantree ports
basic-ip-routing show arp
ip-routes-table show ip route
To Next Page
Loading...
