OmniSwitch 6250/6450 Switch Management Guide May 2012 page 6-1
6 Using the CLI
Command Line Interface (CLI) is a text-based configuration interface that allows you to configure switch
applications and to view switch statistics. Each CLI command applicable to the switch is defined in the
OmniSwitch 6250/6450 CLI Reference Guide. All command descriptions listed in the Reference Guide
include command syntax definitions, defaults, usage guidelines, example screen output, and release
history.
This chapter describes various rules and techniques that help use the CLI to its best advantage. This
chapter includes the following sections:
• “CLI Overview” on page 6-3
• “Command Entry Rules and Syntax” on page 6-4
• “CLI Services” on page 6-11
• “Logging CLI Commands and Entry Results” on page 6-17
To Next Page
Loading...
