Alcatel-Lucent OmniSwitch 6250 - Verifying the User Configuration

Verifying the User Configuration Managing Switch User Accounts
page 9-38 OmniSwitch 6250/6450 Switch Management Guide May 2012
Verifying the User Configuration
To display information about user accounts configured locally in the user database, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch 6250/6450
CLI Reference Guide. An example of the output for the show user command is also given in “Quick Steps
for Network Administrator User Accounts” on page 9-7.
show user Displays information about all users or a particular user configured in
the local user database on the switch.
show user password-size Displays the minimum number of characters that are required for a user
password.
show user password-expiration Displays the expiration date for passwords configured for user accounts
stored on the switch.
show user password-policy Displays the global password settings configured for the switch.
show user lockout-setting Displays the global user lockout settings configured for the switch.
show end-user profile Displays information about end-user profiles.
show aaa classification-rule Displays hexadecimal values for command domains/families.