Alcatel-Lucent OmniSwitch 6250 - Verifying the ASA Configuration

Managing Switch Security Verifying the ASA Configuration
OmniSwitch 6250/6450 Switch Management Guide May 2012 page 10-13
Verifying the ASA Configuration
To display information about management interfaces used for Authenticated Switch Access, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch 6250/6450
CLI Reference Guide. An example of the output for the show aaa authentication command is also given
in “Quick Steps for Setting Up ASA” on page 10-7.
show aaa authentication Displays information about the current authenticated switch session.
show aaa accounting mac Displays information about accounting servers configured for Authenti-
cated Switch Access or Authenticated VLANs.
aaa classification-rule mac-
address
Displays information about a particular AAA server or AAA servers.