Setting Up End-User Profiles Managing Switch User Accounts
page 9-36 OmniSwitch 6250/6450 Switch Management Guide May 2012
Associating a Profile With a User
To associate a profile with a user, enter the user command with the end-user profile keywords and the
relevant profile name. For example:
-> user Customer2 end-user profile Profile3
Profile3 is now associated with Customer2. When Customer2 logs into the switch, Customer2 will have
access to command areas, port ranges, and VLAN ranges specified by Profile3.
The user information stored on an external server can include a profile name. When the user attempts to
log into the switch, the switch will attempt to match the profile name to a profile stored on the switch.
To Next Page
Loading...
