Managing the Directory Structure (Non-Redundant) Managing CMM Directory Content
page 4-24 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
Show Switch Files
The files currently installed on a switch can be viewed using the show microcode command. This
command displays the files currently in the specified directory.
To display files on a switch, enter the show microcode command with a directory, as shown:
-> show microcode certified
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Kadvrout.img 5.3.1.311.R01 823614 Alcatel Advanced Routing
Kbase.img 5.3.1.311.R01 7372509 Alcatel Base Software
Kdiag.img 5.3.1.311.R01 5215 Alcatel Diagnostics Archive
Keni.img 5.3.1.311.R01 2486643 Alcatel Ethernet Network Interface S
Kos.img 5.3.1.311.R01 941331 Alcatel Operating System
Ksecu.img 5.3.1.311.R01 371661 Alcatel Security
If no directory is specified, the files that have been loaded into the running configuration are shown.
Note. The output on OmniSwitch 6800/6850/9000 switches is similar to that shown above.
To display the date when the archive was last updated, enter the show microcode command with the
history keyword, as shown:
-> show microcode history
Archive Created 10/1/04 6:49:34
To Next Page
Loading...
