Alcatel-Lucent OmniSwitch 6800 Series - Adding a New Entry; Table Configuration Page

Configuring the Switch With WebView Using WebView
page 9-12 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
Table Configuration Page
Table configuration pages show current configurations in tabular form. Entries may be added, modified, or
deleted. You can delete multiple entries, but you can only modify one entry at a time.
Adding a New Entry
To add a new entry to the table:
1 Click Add on the Configuration page. The Add window appears (e.g., Add IP Static Route).
2 Complete the fields, then click Apply. The new configuration takes effect immediately and the new
entry appears in the table.
3 Repeat steps 1 and 2 to add additional entries.
Click to select
item to modify
or delete.
Table Configuration Page
Add Window