Logging Into the Switch Using Secure Shell
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 2-19
Closing a Secure Shell FTP Session
To terminate the Secure Shell FTP session, issue the exit command. The following will display:
-> exit
Connection to 11.133.30.135 closed.
This display indicates the Secure Shell FTP session with IP address 11.133.20.135 is closed. The user is
now logged into the OmniSwitch as a local device with no active remote connection.
Note. Establishing and closing the Secure Shell FTPv6 connection is similar to that of the Secure Shell
FTP connection.
To Next Page
Loading...
