Managing Switch Security Verifying the ASA Configuration
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 8-13
Verifying the ASA Configuration
To display information about management interfaces used for Authenticated Switch Access, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show aaa authentication command is also given in “Quick
Steps for Setting Up ASA” on page 8-7.
show aaa authentication Displays information about the current authenticated switch session.
show aaa accounting Displays information about accounting servers configured for Authenti-
cated Switch Access or Authenticated VLANs.
show aaa server Displays information about a particular AAA server or AAA servers.
To Next Page
Loading...
