Switch Security Specifications Managing Switch Security
page 8-2 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
Switch Security Specifications
The following table describes the maximum number of sessions allowed on an OmniSwitch:
Note. The current release supports IPv6 client session for Telnet, FTP, SSH, SFTP, and SNMP on
OmniSwitch 6850 or 9000.
Switch Security Defaults
Access to managing the switch is always available for the admin user through the console port, even if
management access to the console port is disabled for other users.
Session OS-9000 OS-6850 OS-6800
(supports only
v4)
Telnet (v4 or v6) 4 4 4
FTP (v4 or v6) 4 4 4
SSH + SFTP (v4 or v6 secure
sessions)
888
HTTP 4 4 4
Total Sessions 20 20 20
SNMP 50 50 50
To Next Page
Loading...
