Setting Up End-User Profiles Managing Switch User Accounts
page 7-22 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
Associating a Profile With a User
To associate a profile with a user, enter the user command with the end-user profile keywords and the
relevant profile name. For example:
-> user Customer2 end-user profile Profile3
Profile3 is now associated with Customer2. When Customer2 logs into the switch, Customer2 will have
access to command areas, port ranges, and VLAN ranges specified by Profile3.
Note that user information stored on an external server may include a profile name. When the user
attempts to log into the switch, the switch will attempt to match the profile name to a profile stored on the
switch.
Removing a Profile From the Configuration
To delete a profile from the configuration, enter the no form of the end-user profile command with the
name of the profile you want to delete. For example:
-> no end-user profile Profile3
Profile3 is deleted from the configuration.
Note. If the profile name is associated with a user, and the profile is deleted from the configuration, the
user will not have access to the switch.
To Next Page
Loading...
