File and Directory Management Managing System Files
page 1-12 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
Making a New Directory
To make a new directory use the mkdir command. You may specify a path for the new directory. Other-
wise, the new directory will be created in your current directory. The syntax for this command requires a
slash (/) and no space between the path and the new directory name. Also, a slash (/) is required at the
beginning of your path specification.
Note. Your login account must have write privileges to execute the mkdir command.
The following command makes a new directory in the working directory on the OmniSwitch 6800:
-> mkdir /flash/working/newdir1
This drawing represents the content of the /flash/working directory after the new directory is added.
Note. The output on OmniSwitch 6850 and OmniSwitch 9000 switches is similar.
Flash Directory
Working Directory
(Files)
Ksecu.img
Kbase.img
boot.cfg
newdir1 Directory
To Next Page
Loading...
