Alcatel-Lucent OmniSwitch 6800 Series - Verifying the User Configuration

Managing Switch User Accounts Verifying the User Configuration
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 7-23
Verifying the User Configuration
To display information about user accounts configured locally in the user database, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show user command is also given in “Quick Steps for
Network Administrator User Accounts” on page 7-6.
show user Displays information about all users or a particular user configured in
the local user database on the switch.
show user password-size Displays the minimum number of characters that are required for a user
password.
show user password-expiration Displays the expiration date for passwords configured for user accounts
stored on the switch.
show user password-policy Displays the global password settings configured for the switch.
show user lockout-setting Displays the global user lockout settings configured for the switch.
show end-user profile Displays information about end-user profiles.
show aaa priv hexa Displays hexadecimal values for command domains/families.