Alcatel-Lucent OmniSwitch 6800 Series - Page 287

OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 Index-1
Index
Symbols
!! command 5-10
A
aaa authentication command 8-7, 8-8, 8-10, 9-5
aaa radius-server command 8-7
accounting
for Authenticated Switch Access 8-12
ACE/Servers 8-4
application examples
applying configuration files 6-4
Authenticated Switch Access 8-7
CLI 5-7, 5-23
CMM 4-5
configuration file 6-2
customer login user accounts 7-7
Emergency Restore 4-32
file management 1-30
logging into the switch 2-5
network administrator user accounts 7-6
NTP 3-3
Prefix Recognition 5-12
SNMP 10-4
Trap Filters 10-5
WebView 9-5
applying configuration files
application examples 6-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 8-13
Authenticated Switch Access 8-4
accounting 8-12
application examples 8-7
management interfaces 8-9
authentication
MD5 10-28
SHA 10-28
traps 10-31
B
banner
login 2-20
pre-login text 2-21
boot.cfg file 4-3, 4-16
Emergency Restore 4-32
C
cd command 1-9
certified directory 4-3
copying to working directory 4-22, 4-27
Chassis Management Module
see CMM
chmod command 1-18
CLI 5-1
application examples 5-7, 5-23
domains and families 7-17
logging commands 5-15–5-16
specifications 5-2
CLI usage
verify information about 5-24
CMM 4-1
application examples 4-5
boot.cfg file 4-3
cancelling a reboot 4-14, 4-20, 4-25
certified directory 4-3
checking reboot status 4-15
configuration files 4-3
copying
certified directory to working directory 4-22, 4-27
running configuration to working directory 4-16
working directory to certified directory 4-21, 4-26
displaying current configuration 4-23, 4-30
displaying switch files 4-24
image files 4-3
managing 4-13
rebooting 4-13, 4-25
rebooting from the working directory 4-18, 4-26
running configuration 4-3, 4-4
scheduling a reboot 4-14, 4-25
specifications 4-2
swapping primary for secondary 4-29
synchronizing primary and secondary 4-26, 4-27
working directory 4-3
CMM Conditions
verify information about 4-33
CMM scenarios 4-5
lost running configuration 4-5
rollback to previous software 4-8
running configuration saved to working directory 4-6
working directory saved to certified directory 4-7
Command Line Interface
see CLI
community strings 10-27
configuration apply command 6-2, 6-4
for a specific timeperiod 6-5
configuration cancel command 6-7
configuration error-file limit command 6-8
configuration file
application examples 6-2
specifications 6-2
configuration files 4-3, 5-3
errors 6-7
configuration snapshot all command 6-12
configuration syntax check 6-8