NTP Server Quick Steps Configuring Network Time Protocol (NTP)
page 4-4 OmniSwitch AOS Release 6 Switch Management Guide July 2010
5 You can check the client configuration using the show ntp status command, as shown:
-> show ntp client
Current time: THU SEP 15 2005 17:44:54 (UTC)
Last NTP update: THU SEP 15 2005 17:30:54
Client mode: enabled
Broadcast client mode: disabled
Broadcast delay (microseconds): 4000
NTP Server Quick Steps
By default the NTP Server functionality is enabled on the OmniSwitch and will respond to NTP client
requests. See the “Configuring the OmniSwitch as an NTP Server” on page 4-11 for additional informa-
tion.
To Next Page
Loading...
