Using WebView Configuring the Switch With WebView
OmniSwitch AOS Release 6 Switch Management Guide July 2010 page 12-19
Table Paging
Adjacencies
WebView provides a graphical representation of all AMAP-supported Alcatel-Lucent switches and IP
phones adjacent to the switch. The following information for each device is also listed:
• IP address
• MAC address
• Remote slot/port
By clicking on a device, the Web-based device manager (if available) is displayed for that device. If a
Web-based device manager is not available, a Telnet session may be launched. (A route to the adjacent
switch must exist in the IP routing table in order for a Web-based device manager or Telnet session to be
launched.)
To display the adjacencies, click on the Adjacencies button under the Physical group. The Adjacencies
Page displays, as shown below.
Click Next to
view the next
group of
entries.