Alcatel-Lucent OmniSwitch AOS Release 6 - Banner; Toolbar; Feature Options; View;Configuration Area

WebView Overview Using WebView
page 12-6 OmniSwitch AOS Release 6 Switch Management Guide July 2010
WebView Chassis Home Page
Banner
The following features are available in the WebView Banner:
• Options—Brings up the User Options Page, which is used to change the user login password.
• Save Config—Brings up the Save Configuration Screen. Click Apply to save the switch’s running
configuration for the next startup.
• Help—Brings up general WebView Help. Specific help pages are also available on each configuration
page.
• About—Provides basic WebView product information.
• Telnet—Brings up a Telnet session window, through which you can access the switch for CLI configu-
ration.
• Log Out—Logs the user out of the switch and ends the user session. After logout, the login screen
appears. The user can log back into the switch or just close the login screen.
Toolbar
Switch configuration is divided into configuration groups in the toolbar (for example, Physical, Layer 2,
etc.). Under each configuration group are switch features, identified by a name and an icon.
For detailed configuration information on each feature, see other chapters in this guide, the OmniSwitch
AOS Release 6 Network Configuration Guide, or the OmniSwitch AOS Release 6 Advanced Routing
Configuration Guide. Help pages are also available in WebView.
Configuration
Feature
Configuration
Group
View/Configuration Area
Banner
Feature
Options
Toolbar