Managing Switch User Accounts Verifying the User Configuration
OmniSwitch AOS Release 6 Switch Management Guide July 2010 page 10-23
Verifying the User Configuration
To display information about user accounts configured locally in the user database, use the show
commands listed here:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show user command is also given in “Quick Steps for
Network Administrator User Accounts” on page 10-6.
show user Displays information about all users or a particular user configured in
the local user database on the switch.
show user password-size Displays the minimum number of characters that are required for a user
password.
show user password-expiration Displays the expiration date for passwords configured for user accounts
stored on the switch.
show user password-policy Displays the global password settings configured for the switch.
show user lockout-setting Displays the global user lockout settings configured for the switch.
show end-user profile Displays information about end-user profiles.
show aaa hic Displays hexadecimal values for command domains/families.
To Next Page
Loading...
