Verifying File Configuration Working With Configuration Files
page 7-14 OmniSwitch AOS Release 6 Switch Management Guide July 2010
Verifying File Configuration
You can verify the content and the status of the switch’s configuration files with commands listed in the
following table.
show configuration status Displays whether there is a pending timer session scheduled for a con-
figuration file and indicates whether the running configuration and the
saved configuration files are identical or different. This command also
displays the number of error files that will be held in the flash directory.
show configuration snapshot Generates a snapshot file of the switch’s non-default current running
configuration. A snapshot can be generated for all current network fea-
tures or for one or more specific network features. A snapshot is a sin-
gle text file that can be viewed, edited, and reused as a configuration
file.
write terminal Displays the switch’s current running configuration for all features.
To Next Page
Loading...
Need help?
General
