EasyManua.ls Logo

Alcatel-Lucent OmniSwitch AOS Release 6 - Page 97

Alcatel-Lucent OmniSwitch AOS Release 6
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using SNMP SNMP Overview
OmniSwitch AOS Release 6 Switch Management Guide July 2010 page 3-11
5 entConfigChange none module An entConfigChange notification
is generated when a conceptual
row is created, modified, or
deleted in one of the entity
tables.
6 aipAMAPStatusTrap aipAMAPLast-
TrapReason
aipAMAPLast-
TrapPort
aip The status of the Alcatel-Lucent
Mapping Adjacency Protocol
(AMAP) port changed.
aipAMAPLastTrapReason—Reason for last change of port status. Valid reasons are 1 (port added), 2 (change
of information on existing port), 3 (port deleted), and 4 (no trap has been sent).
aipAMAPLastTrapPort—The ifindex number of the port that most recently changed.
7 aipGMAPConflictTrap aipGMAPLast-
TrapReason
aipGMAPLast-
TrapPort
aipGMAPLast-
TrapMac
aipGMAPLast-
TrapProtocol
aipGMAPLast-
TrapVlan
aip Indicates a Group Mobility
Advertisement Protocol (GMAP)
port update conflict.
aipGMAPLastTrapReason—Reason for last GMAP update to not be applied. Valid reasons are 1 (Target
VLAN is an authenticated VLAN), 2 (update would conflict with a binding rule), 3 (update would create two
different VLAN entries for the same protocol), 4 (update would create two different protocol entries for the
same VLAN), 5 (target VLAN is not mobile), and 6 (no trap has been sent).
aipGMAPLastTrapPort—The ifindex number of the last port on which the GMAP was not applied because
of a conflict.
aipGMAPLastTrapMac—The last MAC address for which a GMAP change was not
applied because of a conflict.
aipGMAPLastTrapProtocol—The protocol identifier of the last GMAP change that was not applied because
of a conflict.
aipGMAPLastTrapVlan—The VLAN identifier of the last GMAP change that was not applied because of a
conflict.
Note: This trap (GMAP) is not supported.
8 policyEventNotification policyTrapE-
ventDetail-
String
policyTrapE-
ventCode
qos The switch notifies the NMS
when a significant event happens
that involves the policy manager.
policyTrapEventDetailString—Details about the event that took place.
policyTrapEventCode—The code of the event.
No. Trap Name Objects Family Description

Table of Contents

Related product manuals