8AL90344ENAAed01 35
OmniTouch™ 8128 SE WLAN Handset
7.2.2 Add Contact
Add New Contact
1 Enter the menu by pressing “Menu”.
2 Select “Contacts” in the menu.
3 Select “Add contact”.
4 Select “New”.
5 Select “Add”.
6 Enter a name, see 3.1.1 Alphanumeric Keys on page 11.
7 Press “OK”.
8 Select “Work Number”, “Mobile number”, or “Other number”.
9 Press “Add”.
10 Enter number. It is possible to add a pause “P” in phone numbers by pressing
the Space key 5 times.
11 Press “OK”.
12 If desired, a specific ring signal can be chosen for this contact by selecting “Ring
signal”.
Add from Call List
1 Press “Menu”.
2 Select “Contacts” in the menu.
3 Select “Add contact”.
4 Select “From call list”.
5 Select number in the list.
6 Press “Add”.
7 Select “Work Number”, “Mobile number”, or “Other number”.
8 Press “Add”.
9 Enter name, see 3.1.1 Alphanumeric Keys on page 11.
10 Press “OK”.
11 Press “Save”.
It is also possible to save a contact by opening the call list:
1 Press “Menu” and select “Calls” and “Call list” or just press the Call key .
2 Select “More”.
3 Select “Save number”.
4 Perform step 7) to 11) above.
7.2.3 Edit Contact
NOTE: It is not possible to edit a Company Phonebook contact. The contacts are
indicated by a “Locked entry” icon in front of the name.
1 Press “Menu”.
2 Select “Contacts” in the menu.
3 Select “Edit contact”.
4 Select contact.
To Next Page
Loading...
