Alcatel-Lucent OmniTouch 8128 SE - Page 46

8AL90344ENAAed01 40
OmniTouch™ 8128 SE WLAN Handset
Set different Ring Signals for Internal Call, External Call and Call Back
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Sound & Alerts”.
4 Select “Ring signals”.
5 Different signals for internal calls, external calls, and call back can be set. Select
“Internal call”, “External call”, or “Callback”. The handset has 15 different ring
signals.
6 Select sound using “Select”. By pressing “Play”, you can listen to the different
sounds. Use “Stop” to stop listening.
7 Press “Back”.
Turn the Vibrator on/off
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Sound & Alerts”.
4 Select “Vibrating alert”.
5 Select “On”, “On if silent” (that is, the vibrator is on when the handset is muted),
or “Off”
6 Press “Back”.
Set the Key Sound
This means that every time a key is used, the handset produces a small sound.
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Sound & Alerts”.
4 Select “Key sound”.
5 Select “Silent, “Click”, or “Tone”.
You can listen to the key sound by pressing “Play”.
6 Press “Back”.
Set the Battery Warning Tone
If desired, a low battery can be indicated by a tone, a repeated sound, or set to be
silent.
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Sound & Alerts”.
4 Select “Battery warning”. The default battery warning is “Repeated sound”.
5 Select “Repeated sound, “Sound once”, or “Sound off”.
6 Press “Back”.