8AL90344ENAAed01 42
OmniTouch™ 8128 SE WLAN Handset
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Locks”.
4 Select “Phone lock”.
5 Select “Auto phone lock”.
6 Select “On”, or “On in charger”.
7 Enter PIN code
8 Press “OK”.
If a user forgets the PIN code, it can be reset by the distributor.
Deactivate the Phone Lock
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Locks”.
4 Select “Auto phone lock”.
5Select “Off”.
6 Enter PIN code
7 Press “OK”.
If a user forgets the PIN code, it can be reset by the distributor.
Change PIN Code
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Locks”.
4 Select “Phone lock”.
5 Select “Change PIN code”.
6 Enter the old PIN code.
7 Press “OK”.
8 Enter the new PIN code.
9 Change field by using Downon the Navigation key and enter the new PIN code
again.
10 Press “Save”.
Automatic lock time
You can change the lock time for the phone lock or key lock to suit personal choice, for
example, to shorten it from 20 seconds (default) to 5 seconds, for example, to avoid
accidental redialling when the handset is in a pocket. It can also be good to extend it
1 Press “Menu”.
2 Select “Settings” in the menu.
3 Select “Locks”.
4 Select “Auto lock time”.
5 Select desired lock time of 5, 10, 20 30 seconds or 1 or 3 minutes
6 Press “Back”.
To Next Page
Loading...
