8AL90344ENAAed01 47
OmniTouch™ 8128 SE WLAN Handset
Switch the handset off
The handset can be switched off automatically when it is placed in the charger. When it
is removed from the charger, it switches on again. When the handset is switched off in
the charger, the Owner ID of the handset is shown. This simplifies the identification of
the handset when, for example, charging it together with other handsets.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections” in the menu.
3 Select “In charger”.
4 Select “Switch off”.
Turn the sound off
When the handset is placed in the charger, it will be muted. When the handset is
removed from the charger, the sound switches on again. When the handsets sound is
off/muted in the charger, the Owner ID of the handset is shown. This simplifies the
identification of the handset when, for example, charging it together with other
handsets.
NOTE: If handset restrictions are enabled, the handset might not be switched off/muted
when placed in the charger.
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections” in the menu.
3 Select “In charger”.
4 Select “Sound off”.
Deactivate the In charger action
1 Enter the menu by pressing the “Menu” soft key.
2 Select “Connections” in the menu.
3 Select “In charger”.
4 Select “No action”.
To Next Page
Loading...
