Alcatel-Lucent OXO Connect Series - Page 147

Note:
The Windows TAPI Server does not only provide a larger number of sessions, it also provides a more secure
administration environment based on Microsoft Active Directory, thus it can also be used for a configuration of
less than 25 users.
4.18.1.3 Pre requisites
To be able to use My IC Plugin for Outlook
®
, a user must have a valid extension line configured on an
OXO Connect and a supported phone connected to this line. The list of supported devices can be
consulted in the delivery note.
A TAPI session for each user must be available.
4.18.1.3.1 OXO Connect TAPI licensing.
My IC Plugin for Outlook
®
requires that TAPI be effective on the OXO Connect . As TAPI can be shared
with other applications, there must be at least one TAPI 2.0 free session per My IC Plugin for Outlook
®
user or a TAPI 2.1 server must be installed when there is not enough free TAPI 2.0 sessions for the My
IC Plugin for Outlook
®
number of users.
OXO Connect comes with 25 TAPI 2.0 sessions. If more than 25 sessions are needed the TAPI 2.1
software licence must be bought in addition and provisioned in the OXO Connect .
4.18.1.3.2 Operating system and applications
The My IC Plugin for Outlook
®
application supports:
• Windows Vista SP2 Business, Ultimate or Enterprise (32 OR 64 bit)
• Windows 7 Professional, Ultimate or Enterprise (32 OR 64 bit)
• Windows 8 (32 or 64 bit) but Windows 8 RT not supported
• Windows 8.1 (32 or 64 bit)
• Windows 10 (32 or 64 bit)
• .Net Framework 3.5 Service Pack 1 – refer to the Microsoft Knowledge Base article (http://
msdn.microsoft.com/en-us/kb/kb00318785.aspx).
• Microsoft Outlook: (32 bit only): 2003, 2007, 2010, 2013
• Microsoft Exchange: 2003, 2007, 2010
• Skype (optional): 3.8.0.188 or later
• Live Messenger (optional): 14.0 or later
• Yahoo! (optional): 10.0 or later
• Facebook (optional): Direct link to the current Facebook website
• OXO Connect: Release 9.0 or later
• Windows Installer 3.1
4.18.1.3.3 Hardware
• 1 GHz 32-bit (x86) or 64-bit (x64) processor
• 1 GB of system memory
• At least 40 MB of available space for installation and an additional 10 MB of available space for
configuration and cached contact data
• A Network Connection. 10Mb/s minimum
4.18.1.4 Licensing
To run My IC Plugin for Outlook
®
, the OXO Connect must be provisioned with one My IC Plugin for
Outlook
®
user software licence per user.
The number of My IC Plugin for Outlook
®
user software licence can be reviewed using the OXO
Connect Management Console (OMC), version 9 or later.
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 147/207