6.1.8 Operation of terminals and operator terminal
This function is only available for a business installation (in a Hotel only PCX mode is used).
Choice
"PCX Mode" and"Intercom Mode"
PCX Mode: all the lines are available using two RSB keys (= resource key specific to a bundle) .
Intercom Mode: the terminal has as many RSP keys (= resource key specific to an external access)
as there are lines on the system. Refer to the "Default Configuration" section in this manual for a
presentation of the function of the different keys for each type of terminal depending on the operating
mode selected.
6.1.9 Attributing mailboxes
This function is used for assigning a voice mailbox to the installation terminals:
Choice
: choice between UA terminals, All terminals, and No terminal.
Chapter
6
Start-Up
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 178/207
To Next Page
Loading...
Need help?
General
