• The web proxy details must be configured in OMC in Hardware and Limits > LAN / IP
Configuration > Web proxy tab.
4.17 Extending Your Installation
4.17.1 Configuration of Stations
4.17.1.1 Handset replacement
You can replace your digital terminal by connecting a terminal of the same family, but of a different
type, into your phone socket. This substitution can be temporary or permanent.
Replacing an analog set by another analog set, or replacing a digital set by a set of the same type,
requires no special procedure (simple hardware exchange).
4.17.1.1.1 Temporary substitution
The replacement set keeps its own default functions (customized settings are not transferred). The
data not transferred is stored in the OXO Connect system until a set of the same type as the initial one
is connected.
Unplug
Plug in Plug inUnplug
Defective
terminal
Repaired
terminal
Replacement
terminal
Your terminal is unserviceable Your terminal is repaired
Replacement
terminal
4.17.1.1.2 Permanent replacement
The maximum quantity of data from the initial set is transferred to the replacement. Data not transferred
are deleted.
Unplug Plug in
terminal
terminal
"Terminal replacement"
code + password
Replacement
Defective
4.17.1.1.3 Characteristics preserved during temporary or permanent set substitution
• Rights (restricted features)
• Barring level
• Metering profile
• Messages and last caller repertories
• Destination set for metering reminder, forwarding and/or monitoring
• Set belonging to a hunting group and/or a Manager-Secretary relation
• Appointment reminder
• Locked or unlocked set
• Callbacks
• Active forwarding
• Last number redial
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 141/207
To Next Page
Loading...
Need help?
General
