EasyManuals Logo

Alcatel-Lucent OXO Connect Series User Manual

Alcatel-Lucent OXO Connect Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
5. Enter the administrator password, then press OK to confirm the reset to factory, or press Cancel to
cancel the reset.
If the password is WRONG or Cancel is pressed; the set displays again the reset screen, the
choice selector is set to NO: without further action, the set will go on with normal startup.
If the password is VALID, you are prompted to confirm the action:
6. Press Yes to confirm the reset to factory: reset to factory is performed and the set restarts
immediately.
Press No to cancel: the set displays again the reset screen, the choice selector is set to NO: without
further action, the set will go on with normal startup.
4.4.3 4135 IP Conference Phone
4.4.3.1 Commissioning
4.4.3.1.1 Overview
This module presents all the actions required for commissioning 4135 IP Conference Phone sets.
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 87/207

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OXO Connect Series and is the answer not in the manual?

Alcatel-Lucent OXO Connect Series Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelOXO Connect Series
CategoryServer
LanguageEnglish

Related product manuals