71
Accessories
Input: 230 V - 50 Hz
Output: 12 V DC - 500 mA
The Mobile 200 is supplied with a Li-Ion battery, with a capacity of 600 mAh - 3.6 V.
The Mobile 100 is supplied with a NiMh battery, with a capacity of 550 mAh - 3.6 V.
Initial charge:
10 2. Characteristics of the mains power adapter
10 3. Battery
Autonomy of your telephone
On standby in the radio
coverage zone
In continuous conversation
Li-Ion battery
135 hours
15 hours
NiMh battery
120 hours
13 hours
Place the telephone
in the charging
holder
Battery icon
flashing
In charging phase
(5 hours minimum)
The battery
is charged
The mains power socket used must be close to the charger/holder and easily
accessible, so that it can be used as an "on/off" facility.
Maximum battery performance is only reached after around 10 charge/discharge
cycles.
These batteries contain polluting substances: do not dispose of them in a dustbin -
take them to a specialized collection point.
To Next Page
Loading...
