Chapter 4 Key facilities programmable by system management
4-4 3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
▼ Programmable
This function is used to allocate a set number, group number or trunk group number to the key.
Pressing this key directly activates the call without numbering.
Note: In the case of an external number whose format is not known, the attendant must use the «EndNum»
key.
▼ Transfer with privilege
This function lets the attendant transfer an external O/G trunk to an user set if the corresponding
direct seize prefix is contained in this key. The user will dial the external correspondent number
as same a call in direct seize.
To Next Page
Loading...
