Alcatel 4035 - Page 45

Attendant set facilities
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 2-23
When the external called party replies, the following is displayed:
Conversation screen
Pressing the «Transf» key is used to transfer the call to the user on hold (transfer on answer).
By pressing the «
EnqOff» key, the called correspondent is released and the following is displayed,
for example:
Pressing the «OnHold» key is used to put the first correspondent on hold.
2-1-3-2 By abbreviated dialling
The attendant accesses abbreviated dialling by:
- the direct call prefix,
- the access prefix followed by the row of the abbreviated number,
- pressing the key programmed for an abbreviated number.
Once the analysis of the numbering has terminated, the screen is the same as the one described
above.
2-1-3-3 By programmed key
When a key is programmed
(see Chapter 4) , pressing this key activates the seizure of a line in
the supervised trunk group. The attendant must then dial the external number.